PROPC

Responding to a need for homogenizers that can run repetitive batch
processing with a minimum of operator attention, PRO developed the
computer-interfaced PRO "PC" Series.

The PRO300PC, PRO350PC, and PRO400PC, are programmed either from
the unit's touchpad, or from your own laptop or desktop computer (serial
communication mode RS232). An infinite number of programs can be created
and stored, each consisting of up to 23 unique cycles defining speed, run time
and pause between each cycle. At any point the PC Series homogenizer can be
overridden and manual control resumed.

PRO "PC" homogenizers meet industry requirements for verification of
processing and documentation maintenance. As homogenization proceeds,
data can be graphed on the computer screen. Both the programs and the data
collected (set time and set speed versus actual time and actual speed) can be
stored and recalled for screen display or printout.

For further specifications refer to the appropriate model:

PRO300, PRO350, and PRO400

Catalog No.	Description
01-01300PC	PRO300PC Homogenizer Benchtop, variable speed: 2,000 to 28,000 rpm, 3/4 hp, 120 V, 50/60 Hz, 5.8 A. Includes: variable speed motor mounted on a manual PRO TRAC Stand, tool kit, instruction manual, PROgrammable Software (CD), RS232 interface cable
01-02300PC	PRO300PC Homogenizer Benchtop, variable speed: 2,000 to 28,000 rpm, 3/4 hp, 220 V, 50/60 Hz, 2.9 A. Includes: variable speed motor mounted on a manual PRO TRAC Stand, tool kit, instruction manual, PROgrammable Software (CD), RS232 interface cable
01-01350PC	PRO350PC Homogenizer Benchtop, variable speed: 2,000 to 22,000 rpm, 1 hp, 120 V, 50/60 Hz, 6.8 A. Includes: variable speed motor mounted on a PRO TRAC Motorized Stand, tool kit, instruction manual, PROgrammable Software (CD), RS232 interface cable
01-02350PC	PRO350PC Homogenizer Benchtop, variable speed: 2,000 to 22,000 rpm, 1 hp, 220 V, 50/60 Hz, 3.4 A. Includes: variable speed motor mounted on a PRO TRAC Motorized Stand, tool kit, instruction manual, PROgrammable Software (CD), RS232 interface cable
01-01400PC	PRO400PC Homogenizer Benchtop, variable speed: 2,000 to 23,000 rpm, 1-3/4 hp, 120 V, 50/60 Hz, 10 A. Includes: variable speed motor mounted on a PRO TRAC Motorized Stand, tool kit, instruction manual, PROgrammable Software (CD), RS232 interface cable
01-02400PC	PRO400PC Homogenizer Benchtop, variable speed: 2,000 to 23,000 rpm, 1-3/4 hp, 220 V, 50/60 Hz, 5 A. Includes: variable speed motor mounted on a PRO TRAC Motorized Stand, tool kit, instruction manual, PROgrammable Software (CD), RS232 interface cable
80-00100C	Vessel Holder Assembly w/ Seperate Support Post Includes: cross rod, post clamp, vessel holder w/ strap and support post